Like the old Dave Clark Five song...
Bits & Pieces
SPOKESHAVES/DRAWKNIVES
MISCELLANEOUS
small 4 1/2" unmarked hand vice. works great $8
medium 5"/51/2" hand vice...unmarked $8 each...
large hand vice this is what they used before vice grips..very handy tool...8" $10
yankee push drill bits: all brand new un-used bits; factory fresh fluted bits that wiil fit the Stanley/Yankee/North Brothers 40 series of pushdrills and a few others made by the above..took me days to sort out all the bits..thank god they’re all marked, but I still had to use a magnifying glass
Individual bits: each, all as above factory fresh new bits..multiples available on some sizes..
3/32nd ..$3 each good size a few left
11/64th ..$2 each largest size..plenty to go around
also have two sizes of spiral twist drills that will fit the same drills..same shank size..marked “ATM –CS” only two sizes 3/32nd and 1/8th 2 for $1.00
also have a large lot of small shank (1/8th”) fluted bits..no notch or cut out like the Yankee bits..putting sets together may be problematic..no markings and my eyes aren’t that great..if anyone’s interested drop me a line..again all factory fresh-brand new bits…will fit a compression type chuck in a pushdrill or a hand drill vice...3 or 4 jaw...various sizes $1.00 Each
I've got a lot of frogs, chipbreakers and blades...various sizes and types; mostly all organized, ask if you have a specific want.
Knobs & totes are practically non-existent right now...don't even ask.
I've got a lot of various Stanley only frog screws. rods and nuts for totes & knobs, frog assembly pieces, please ask...
frog screws w/ washers..$0.50 pair (two screws with two washers)
rods and brass nuts for knobs and totes..please specify length..$2.00 each
frog adjustment nuts knurled, please specify small or large..dated or not..$1.00 each
raw bodies/beds...$8 each for any size..no cracks chips..all solid..have a lot of #5's a few 4's and 3's and a very few #6-#8's...different eras..inquire
BLADES & CHIPBREAKERS
Stanley arch logo TmT c.1909-1912 full length blade to fit a #6 or a #7..$18 SOLD
Stanley "V" logo.
Stanley Sweetheart logo blade for
#4 & #5 2 1/4" of blade left..near to full length..w/breaker..$15
Stanley notched rectangle blade
for #4 or #5..2" of blade..w/breaker..$15
Stanley Sweetheart blade for a
#3..1 1/2" of blade w/breaker..$15
Stanley Rule in arch blade for
#3..hole at the top..TmJ c.1874-1884
7/8th" of blade with breaker..$13
Keen Kutter blade for a #4 or #5..1 5/8th" of blade..hole toward the top..w/breaker..$15
Sargent blade for a #418..#6 or #7..full length w/breaker...$18
Blades for a #71 router plane..old style with no depth scale..3 of the 1/4" size...1 of the 1/2" size..going fast....$8 each SORRY ALL SOLD FOR NOW
Stanley "ready-edge" blades for the short-lived experiment in disposable blades. all four edges are honed and when one wears out you just rotate to a new blade..these are new old stock that are a bit discolored but not rusty...interesting concept that really didn't catch on...blades very hard to find...have 2 of these left ..$5 each
Stanley And Sargent #2 size parts
Stanley No. 2 blades…full length NOS new old stock..notched rectangle blades..$35 each LINK
Sargent #407(#2 size)blade & chipbreaker almost full length no pitting proper logo $75
Stanley #2 blade Sweetheart 1" of blade left.........$35
Stanley #2 frog....Sweetheart era..like the blade above 98% japanning...clean..with depth adjust nut and frog screws.....$60
Stanley #2 tote screw and nut $25
Sargent #407(2 size) lever cap..plain Sargent logo beautiful shape $75
Stanley 25 year service pin..14k gold..clean…$55 LINK
Stanley Service medallion..25 years..10K gold..clean and shiny..$95 LINK
Stanley casting markers.. Set of 8 Mother casting markers for U.S. foundry use when they were casting the bodies for Stanley planes..these include “Bailey”, “Made in USA”, No.3 , No.4, No.4 ½ No. 5, No.5 1/ -(for either ¼ or ½,) No.7 . These came out of a foundry based in New Britain many years ago and are authentic casting markers.. probably the rarest Stanley collectable you’re likely to ever see, set of 8..FINE+..$100 LINK
Stanley flea market tote bag…more than big enough for that #45 with all the blades that you'll find for $8 …nice heavy canvas bag with reinforced handles that really is good for flea marketing…nice BIG Stanley logo...you won't have to speak.. people will know what you're looking for…AND they're cheap..only two left...$5..
Stanley coffee mug..black coffee mug with the Stanley logo. If you drink coffee, tea or big shots of tequila this is the correct mug for you!…Well, O.K. maybe not for tea…but they will certainly look better in your shop than the one with the flowers on it…$2.00 ea.
BELT BUCKLE, METAL BIN TAGS AND SPORT WATCH AVAILABLE ALSO..$8 EACH.